Az inverter a napelemből érkező egyenáramot (DC) váltakozó árammá (AC) alakítja. A PV inverterek között lakossági, kereskedelmi és közüzemi felhasználásra szánt eszközök is megtalálhatóak. A Solarity olyan jól ismert gyártók termékeit kínálja, mint például a Deye, a FIMER, a Fronius, a Huawei, a Kaco, a SMA, a SolaX, a SolarEdge vagy a Tigo. További információkat webshopunk termékleírásainál talál.
KACO new energy uses combiner boxes to support you with very flexible system design. First and foremost, DC combiners enable the "Virtual Central" concept:In ground-mounted solar power plants, the inverters are installed at a central location, while the DC combiners are spread across the PV module array. This leads to short cable runs between the inverters and the transformer and means that there is only minimal loss of power on the AC side: The high efficiency of our inverters can be deployed to its fullest. In commercial and industrial PV systems, this kind of design makes it possible to avoid AC lines on the roofs.- Designed for a DC system voltage up to 1 500 V
- Direct connection of DC strings
- String monitoring (optional)
- Protection rating IP65
- IEC 61439-2 compliant planning and construction
- Surge protection device type I + II
- Flexible number of DC inputs
- Fuse protection on plus and minus side 15 A / 20 A /25 A / 30 AAmbient temperatures:
Indoor: - 5° C to max. + 40°C (+ 35°C 24h average)
Outdoor: - 25° C to max. + 40° C (+ 35° C 24h average)Relative humidity:
Indoor: Max. 50% at +40°C, max. 90% at +20°C (not condensating)
Outdoor: Temporary 95% at +25°C (not condensating)Altitude above sea level. Max. 2000m
Permanent permissible load: 70 kg vertical and horizontal position
In general, this sensor measures the temperature on surfaces. By mounting the sensor on the back of the PV module, the module temperature can be measured.
The temperature of the PV module is one of the decisive factors for the power output. By supervision, the PV-owner can conclude the performance of the power chart.
Mounting tip: It is recommended to fix the sensor and the cable with an additional adhesive tape.
Technical data
Sensor
PT1000
Measuring range
-20°C to +150°C
Accuracy
±0.8°C (in the range -20°C to 100°C)
Design
Sensor on an adhesive film for measurement
on sheets
Dimensions
50 x 100 mm
Cable
3 m Cu-cable; silicon isolated,
ferrules, UV-resistant
Max. cable length
(Distance: Sensor Card/Box - sensor)
20 m
These web pages save cookies, which help to work properly. By using the web you agree to their use. További információ a sütikről
A kosár üres
.png?w=408)
.JPG?w=408)
