COMPACTGROUND G15

Description Aerodynamic installation system for the stand-mounting of framed
PV modules on open ground.
Scope of use On grassland and farmland, as well as on sand, gravel, grit, concrete, or
asphalt
Module dimensions 950 – 1‘150 mm x 1‘500 – 2‘250 mm (width x length)
Installation angle 15°, unilateral
Row spacing CompactGROUND G15 (18° internal shading angle): 797 mm
CompactGROUND G15 (25° internal shading angle): 555 mm
Distance from the roof
surface / floor surface CompactGROUND G15: Approx. 400 mm
Distance from roof edge -
Max. building height -
Ground anchors Up to 10° possible with ground anchors; over 10° on request
Max. field size 12 x 20 rows; 240 modules
Min. field size 3 rows for every 2 modules; or 2 rows for every 3 modules
Wind load Suction load up to 2.4 kN/m2
Snow load Pressure load of the CompactGROUND G15 Standard up to 1.6 kN/m2
Pressure load of the CompactGROUND G15 Alpin up to 2.4 kN/m2
Design/stability
verification Software-supported based on wind tunnel analyses
On-site requirements
Sufficient load-bearing capacity and compressive strength of the
ground must be ensured on site. The general terms and conditions,
terms of warranty, and the user agreement apply.
Module approval The list of approved modules is provided by AEROCOMPACT®;
individual approvals through the module manufacturer
Components Module clamps with grounding pins, open ground brackets, ballast
stones; optional ballast trays, ground anchors
Materials
Bearing connecting parts made from aluminum EN AW 6060 T64; module clamps made from aluminum EN AW 6063 T66; screws made from
stainless steel A2-70; ballast trays made from steel with aluminum–zinc
coating; ground anchors made from cast aluminum