Montážní systémy pro fotovoltaiku

Montážní systém pro fotovoltaické panely je velice důležitým prvkem v rámcicelého FV systému, i když je téměř neviditelný. Kvalitní montážní systém zaručuje dlouhodobou stálost fotovoltaického systému. U nás najdete montážní systémy od výrobců Aerocompact, K2 Systems nebo TreeSystem. Během procesu návrhu a instalace zařízení se ujistěte, že dodržujete všechnypokyny od výrobce.

Pokud si nejste s výběrem jisti, obraťte se na nás, rádi vám poradíme.Zajistíme rovněž dodávku montážního systému po celém světě a poskytujeme možnostvyužití financování na míru.

Více informací najdete v popisech produktů.

Střešní montáž

Pozemní montáž

Dlaždice

Katalog

Seznam

DoporučujemeAkce

Omezená nabídka

K2 BasicRail 2,25 m

Více informací

K2 Hanger Bolt M12x250, solid rail pre-assembled (SU=25)

Více informací

K2 SolidRail UltraLight; 3,65 m

Více informací

K2 SolidRail CrossConnector Set (SU=10)

Více informací

AEROCOMPACT BR1980 Baserail L=5800mm

Více informací

K2 Set Rail connector for K2 SolidRail UltraLight 32 + Light 37 (SU=10)

Více informací

K2 MultiRail 25/4 (SU=50)

Více informací

K2 Insertion rail Cross connector (SU=20)

Více informací

AEROCOMPACT XPCN rail connector X40 and X50

Více informací

K2 MultiRail 10CSM

Více informací

K2 MiniRail Set (SU=20)

Více informací

4097-ts15-trapez-kurzschiene-parallel-150-mm-510x313

AEROCOMPACT TS15 trapezoidal-sheet short rail 150 mm

Více informací

K2 SingleRail 36 Light; 4,40 m

Více informací

1 2 3 4 5

Filtr zboží

Naposledy navštívené produkty

K2 Single Rail 36; 2,1 m

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. Length: 2,10 m. Material: Aluminium EN AW-6063 T66

K2 BasicRail 2,40 m

Quick mounting rail with static confirmation in K2 Base. For mounting with SpeedClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 2,25 m. Material: Aluminium EN AW-6063 T66

X1-FIT-3.7-W

"Generate energy from your solar panels during the day, once the background load is satisfied, the intelligent SolaX X1 Retro Fit will direct excess energy into your battery for later use. Enabling you to make the most use of your generated energy. If your home experiences a loss of power, the X1 Retro Fit will then send the stored power back to the home, ensuring you are never left in the dark even during a power-cut. Compatible with every inverter manufacturer, the X1 Retro Fit charger is the perfect upgrade to your system.

Add To Existing PV Systems

The SolaX X1 Retro-Fit Charger can be fitted alongside any string inverter on the market today, enabling you to upgrade to solar battery storage without changing your current installation. You also get the added benefit of emergency power supply, keeping you powered during a power cut.

without power, even during a power-cut. An emergency power supply or ‘EPS’ switch (on

ly available on ‘E’ models) enables the X1 Retro-Fit to work completely off-grid, meaning that any power you have stored on your batteries will now be used in the event of a power cut.without power, even during a power-cut. An emergency power supply or ‘EPS’ switch (only available on ‘E’ models) enables the X1 Retro-Fit to work completely off-grid, meaning that any power you have stored on your batteries will now be used in the event of a power cut."

595W Deep Blue 4.0 Silver Frame BIFA

The JA Solar 595W DEEP BLUE 4.0 Bifacial Module (JAM72D40_MB_595W) delivers top-tier performance with advanced bifacial technology, capturing sunlight on both the front and rear sides to significantly boost energy yield. This module is crafted to meet the demands of high-efficiency solar projects while maintaining a compact design for versatile installation.

Key Features:

High Power Output: 595W maximum power output for robust energy generation, suitable for various applications.
Bifacial Technology: Dual-sided energy capture allows for higher efficiency, utilizing sunlight reflected from surrounding surfaces.
Advanced Cell Design: Equipped with PERC technology, maximizing performance even under low light conditions and ensuring reliable energy production.
Durable & Reliable: Engineered with a sturdy frame and tempered glass, this module is built to withstand diverse weather conditions and maintain efficiency over time.
Extended Performance Warranty: Benefit from a 30-year linear performance warranty, ensuring dependable energy output and system longevity.

Ideal Applications: Perfect for commercial rooftops, utilit

K2 Set End Clamp 42-44mm, black anodized

Black anodized module end clamp set for fixing solar modules with frame heights 42-44 mm. Not compatible with K2 MiniRail, MicroRail, Dome 6 and Dome V system. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA Eloxal may show slight scratches as a result of packaging and transport.

Montážní systémy pro fotovoltaiku

K2 D-Dome 6.10 Base Set

K2 MiniRail MK2 Set

K2 MicroRail CSM 25 Set

K2 SolidRail Light 37; 2,25 m

K2 SolidRail UltraLight; 2,25 m (SU=20)

K2 SolidRail Light 37; 3,30 m

K2 InsertionRail 35; 5.40 m

K2 BasicRail 2,25 m

K2 Hanger Bolt M12x250, solid rail pre-assembled (SU=25)

K2 SolidRail UltraLight; 3,65 m

K2 SolidRail CrossConnector Set (SU=10)

AEROCOMPACT BR1980 Baserail L=5800mm

K2 Set Rail connector for K2 SolidRail UltraLight 32 + Light 37 (SU=10)

K2 MultiRail 25/4 (SU=50)

K2 Insertion rail Cross connector (SU=20)

AEROCOMPACT XPCN rail connector X40 and X50

K2 MultiRail 10CSM

K2 MiniRail Set (SU=20)

AEROCOMPACT TS15 trapezoidal-sheet short rail 150 mm

K2 SingleRail 36 Light; 4,40 m

Filtr zboží

Naposledy navštívené produkty

K2 Single Rail 36; 2,1 m

K2 BasicRail 2,40 m

X1-FIT-3.7-W

595W Deep Blue 4.0 Silver Frame BIFA

K2 Set End Clamp 42-44mm, black anodized

Košík obsahuje nepovolené položky

Zboží bylo přidáno do porovnání

Cookies

Pro zobrazení tohoto obsahu potřebujeme váš souhlas!

m2user::data::person::Id
m2user::data::person::CurrentRegistrationRIDCalc
m2user::data::person::CurrentRegistrationRIDCalc.Email